How to Verify a DRC Copper Company: RCCM, Id. Nat. and CAMI
Before you pay a Congolese copper seller, check its RCCM number, Id. Nat., directors and CAMI mining title. A practical broker guide with a checklist.
Copper Supply7 min read
A lot of the copper offers in your inbox start in the DRC. A lot of the weakest paper starts there too. A seller sends a PDF with a stamp, an RCCM number and a line that says "PE holder", and the buyer moves straight on to price. Most of the time nobody checks any of it.
This is the check I run on a Congolese company before I put a buyer in front of it. It takes days, not weeks, and it saves a lot of wasted calls.
Start with the numbers on the letterhead
A real Congolese company normally shows these on its letterhead, invoices and offers:
- RCCM: its number in the Registre du Commerce et du Crédit Mobilier, the OHADA trade register. The DRC has been in the OHADA system since 2012.
- Id. Nat.: the identification nationale number.
- NIF: the tax number issued by the tax office (DGI).
- A full address: avenue, number, quartier, commune and town.
Since the one-stop shop for company creation (the guichet unique) opened, new companies typically get the RCCM, Id. Nat. and NIF in the same process. So a company with an RCCM but "no NIF yet" several years later deserves a question.
Ask for copies of the RCCM extract, the Id. Nat. certificate, the NIF certificate and the statuts (articles of association). Then read the numbers before you read the price.
Read the RCCM number properly
A DRC RCCM number typically looks like this: CD/LSH/RCCM/19-B-01234. Each part tells you something.
- CD is the country.
- LSH is the registry town, here Lubumbashi. It should match where the company says it is based, or they should explain why not.
- 19 is the year it was registered.
- B means a company (personne morale). A means a sole trader, a natural person.
That last letter catches people. If a "mining group" with ten years of exports has an A number, you are dealing with one person trading in their own name. That is not illegal. It is just not what the offer says. The year works the same way: a company registered six months ago that claims a long export record needs to show where that record came from.
Now compare names, word for word. "XYZ Cuivre SARL" and "XYZ Cuivre Trading SARLU" are two different legal persons. The name on the RCCM extract must match the offer, the draft SPA and the bank account. Check the legal form as well. SARL and SA are common. An SARLU has a single shareholder.
One more point. A PDF sent by the seller is a copy the seller chose to send. It shows what was registered at some date, not what is on file today. Only the registry, at the greffe of the commercial court in that town, can confirm the entry is real and current.
Find out who is behind it
The statuts and the RCCM file name the shareholders (associés) and the people who run the company: the gérant in an SARL, the board and the directeur général in an SA. You want to know three things.
First, is the person you are talking to on that list? If not, what written authority do they have? Ask for a procuration on company letterhead, signed by the gérant or DG, naming them and this deal.
Second, has the management changed recently? A new gérant a few weeks before a large offer is a reason to slow down.
Third, do the same names appear behind other companies in deals that went wrong? Run every name through sanctions screening and your own records. See sanctions screening basics.
Brokers often sit between you and the company, and that is normal. But before an SPA, someone with signing power should speak to you on a video call, with ID, and the name should match the file.
Check the mining title at CAMI
Many DRC offers lean on a mining title. The Cadastre Minier (CAMI) keeps the register of mining rights under the Mining Code (2002, revised in 2018) and publishes a public online map of titles. For copper you will mostly see:
- PR (Permis de Recherches): an exploration permit. It does not allow commercial production. A seller offering monthly tonnage "from our PR" has a problem.
- PE (Permis d'Exploitation): a mining permit for production.
- PER (Permis d'Exploitation des Rejets): a permit to work tailings and old dumps.
- PEPM (Permis d'Exploitation de Petite Mine): a small-scale mining permit.
Artisanal mining is a separate system, in zones called ZEA, with cooperatives and licensed buyers. Plenty of copper in Haut-Katanga and Lualaba comes through that route, and the paper trail looks different.
When a seller gives you a title number, check five things:
- The title exists and is the type they claim.
- The holder's name matches the RCCM name exactly.
- The status. A title can be valid, expired, suspended or cancelled. Online data can lag, so confirm at a CAMI office if the deal depends on it.
- Copper is among the listed substances (often with cobalt).
- The location fits with where the material is said to be stored.
If the seller is not the holder, ask how they have rights to the material. A lease of the title (amodiation) should be registered with CAMI. An offtake or sub-contract should be on paper, signed by the holder.
Many sellers do not mine at all. They are traders buying from processing plants or licensed buyers. That is fine. The question then becomes whose title the material comes from, and what paper links this lot to it. For how material moves from pit to port, see the African copper supply chain.
Go and look at the address
Congolese addresses can be vague: an avenue and a commune, sometimes only a quartier. A company that says it runs a plant, yard or warehouse should be able to give GPS coordinates. Then someone independent should go and look. Is there a building, a sign, people working, a weighbridge, material on the ground?
Be clear about what that visit is. It is a visual check. It does not weigh, sample or assay anything, and it does not prove grade, weight or who owns the material. It does tell you whether the place exists and whether the story fits what is there. For a worked example, read how to check a copper warehouse in Kolwezi.
Warning signs I see often:
- The address is a hotel, a shared office or a house in a residential area, for a company claiming industrial output.
- The GPS pin lands in an empty plot or inside another company's yard.
- The RCCM is in Kinshasa, the "warehouse" is in Kasumbalesa, and nobody in Katanga can show you anything.
- The seller refuses any visit, or asks the buyer to pay a "visit fee" to their own contact.
Checklist before you move to an SPA
- RCCM, Id. Nat., NIF and statuts received
- RCCM number read: town, year, A or B
- Company name identical on RCCM, offer, SPA and bank details
- Signer named in the file, or holding a signed procuration
- RCCM entry confirmed at the registry, not only from the seller's PDF
- Mining title found at CAMI: right type, right holder, valid, copper listed
- If the seller is not the holder: amodiation or offtake paper seen
- Address and GPS given, site seen by someone independent
- All names screened against sanctions lists
Keep this next to the wider seller verification guide, and see the DR Congo country page for context on the market.
How Copper Supply helps
In Haut-Katanga and Lualaba, Copper Supply's field partner in Lubumbashi can check a company at the RCCM trade register, the CAMI mining cadastre and its address for $149, or visit one warehouse, yard, plant or site for $450, with GPS- and time-stamped photos, video and a written report. You pay Copper Supply, never anyone on the ground, and you are refunded if the check can't be done. Details are at /drc-field-checks, with town pages for Lubumbashi, Kolwezi, Likasi and Kasumbalesa. Our DRC document checklist is free at /check/checklists, and every member passes an ID check before they can message anyone.
Related guides
Checking people2 min read
How to verify a copper seller before you send anything
Everyone says they have stock. Five checks that separate sellers who control copper from people forwarding someone else's offer.
Read the guideChecking people2 min read
Due diligence on a copper counterparty: what to check, and when to pay for it
A step-by-step list for checking a company before you sign or pay, and when it is worth commissioning a full due-diligence report.
Read the guideThe market2 min read
From mine to port: how African copper reaches buyers
Where Central African copper is produced, the road and rail corridors it travels, and the warehouses where most trades are inspected and paid.
Read the guide